Перейти к публикации

Рекомендованные сообщения

Game settings

The client settings allow you to select graphics quality, configure sound, controls and the display of game information. The parameters of each tab and their effect on the game are described below.

GPU — graphics processing unit; in the descriptions below, GPU refers to the graphics card as a whole. CPU — the computer's central processing unit.

Video — graphics

The tab Video contains settings for the image, graphics quality and visual effects. Choose them according to your computer's capabilities: higher detail and additional effects may increase the load and reduce FPS — the number of frames per second.

Display Settings — basic image settings

  • Window Mode — selection of the game's display mode: fullscreen, borderless windowed or windowed.
  • Screen Resolution — image resolution. Affects its detail and the rendering load.
  • Render Resolution — the internal resolution at which the client renders the game scene. Lowering the value reduces the load and may increase FPS, but makes the image less sharp.
  • Anti-Aliasing Method — selection of the method for smoothing object edges. Affects the visibility of «jaggies», image sharpness and performance.
  • Brightness — image brightness.
  • FOV — the camera's field of view. Changes the width of the visible scene and its visual perception, but does not set the draw distance.
  • GUI Scale — interface scale: from 100% to 300%. Allows you to enlarge interface elements, including on high-resolution screens. If the settings window becomes inaccessible after changing the scale, press Ctrl + Alt + Home, to restore the original interface size.
  • Vertical Sync — vertical synchronization with the monitor's refresh rate. Helps eliminate screen tearing and may reduce the load on the graphics card by limiting the frame rate.
  • FPS Lock — limits the maximum frame rate independently of the monitor's refresh rate. A lower limit may reduce the load and heating of the graphics card; a high one leaves the client more capacity for rendering frames. A limit of 144 FPS and above allows a higher load, while 60 FPS and below helps reduce it. With the limit disabled, the client can use all the available performance of the graphics card, unless it is limited by the CPU, which may increase heating.

Advanced Settings — graphics quality

  • Graphic quality — the overall graphics quality level, from Potato to Epic. Allows you to quickly select the balance between image quality and performance.
  • Show Detailed Settings / Hide Detailed Settings — opens or hides detailed graphics settings.
  • Performance Settings — selection of an overall set of quality parameters in the detailed settings section.
  • Overall View Distance — the overall object draw distance. A higher value allows you to see objects farther away, but may increase the load.
  • Anti-Aliasing — anti-aliasing quality. Higher quality reduces the visibility of uneven object edges. When using TSR with image scaling (upscaling, similar to DLSS and FSR), a level of High or above, is recommended to reduce visual artifacts.
  • Post-Process — image post-processing quality. Affects the processing of the finished frame and the associated visual effects.
  • Texture — texture quality: the detail of object surfaces. Higher quality requires more video memory.
  • Shadow — shadow quality. Increasing quality makes shadows more detailed, but increases the load and requires more video memory.
  • Effects — visual effects quality. Affects their detail and the load when displaying them.
  • Foliage — vegetation display quality. Higher quality may increase the load in scenes with a large amount of vegetation.
  • Volumetric Fog — volumetric fog. Adds depth and volume to fog in the scene, but may significantly increase the load. Disabling it is recommended to improve performance.
  • Lumen — a global illumination system that replaced SSGI. Makes scene lighting more realistic, but increases the load. If FPS is the priority, disable it.

Misc. Settings — additional visual settings

  • Weather Effect — selection of weather effects. Changes the atmosphere of the scene; additional effects may reduce FPS on less powerful computers.
  • Stylization — image stylization using visual filters. Allows you to change the appearance of the image, including when creating screenshots, videos and streams. Does not affect performance.
  • Bloom — a glow around bright areas of the image.
  • Motion Blur — image blurring during movement.
  • Depth of Field — depth of field: blurring of out-of-focus areas of the scene.
  • Chromatic Aberrations — a colored fringing effect that imitates optical distortions.
  • Smooth Camera — makes camera movement smoother and adds inertia to it.

How to increase FPS

If FPS is insufficient, start with the most resource-intensive settings. Change parameters one at a time, checking the result and image quality.

What to disable or reduce

  • Disable Lumen and Volumetric Fog — global illumination and volumetric fog may significantly increase the load.
  • Lower Render Resolution — this will reduce the scene rendering load, but the image will become less sharp. When using TSR with upscaling, try to keep the quality of Anti-Aliasing no lower than High.
  • Reduce Graphic quality. For more precise adjustment, open Show Detailed Settings and lower the quality of shadows, effects, vegetation and the draw distance. In Weather Effect remove additional weather effects.
  • Disable Bloom, Chromatic Aberrations, Motion Blur and Depth of Field, if you do not need these effects. Their impact on performance is insignificant, so you should not expect a large FPS increase just from disabling them.

What to enable

  • Optimization on the Optimization tab — for large-scale PvP and sieges, select Performance, if FPS is more important, or Balanced for a balance of quality and performance. ATOS reduces the animation update rate of distant characters; with stronger optimization, their motions and movement in the scene may look jerky.

To reduce load and heating use FPS Lock with a comfortable frame limit or Vertical Sync to synchronize with the monitor. These parameters limit the frame rate rather than increase the maximum FPS.

Monitor component temperatures and choose a balance of quality and performance suitable for your computer. Gameplay should be enjoyable — do not forget to take breaks.

Images of Video settings▾ click to open/close

image.png image.png

System requirements▾ click to open/close

Minimum requirements

For playing Lu4 with graphics settings Medium.

  • Operating system: Windows 10/11 (64-bit).
  • Processor (CPU): Intel Core i5-8400 or AMD Ryzen 5 1600; preferably 6 cores.
  • Random access memory (RAM): 16 GB.
  • Graphics card (GPU): NVIDIA GeForce RTX 2060 or AMD Radeon RX 5700 (8 GB of video memory).
  • DirectX: version 11 / 12.
  • Disk space: 50 GB or more of free space.

Recommended requirements

For playing Lu4 with graphics settings Epic.

  • Operating system: Windows 10/11 (64-bit).
  • Processor (CPU): Intel Core i7-11700K or AMD Ryzen 7 5800X and above; 8 cores or more.
  • Random access memory (RAM): 32 GB or more.
  • Graphics card (GPU): NVIDIA GeForce RTX 3070 or AMD Radeon RX 6700 XT and above (8 GB of video memory).
  • DirectX: version 11 / 12.
  • Disk space: 50 GB or more of free space.

Audio — sound

The tab Audio allows you to select an output device and separately adjust the volume of different sound categories.

Base Options — basic sound settings

  • Mute all — disables all game sounds.
  • Reverse channels — swaps the left and right audio channels.
  • Sound in Background — allows sound playback when the game window is inactive.
  • Master Volume — the overall game volume.
  • Source — selection of the audio output device.

Advanced Settings — volume of individual categories

  • Music — music volume.
  • World — volume of game world and environmental sounds.
  • Effects — sound effects volume.
  • Interface — interface sound volume.
  • Steps PC/NPC — volume of character and NPC footsteps.
  • Monster PC/NPC — volume of the monster and character sound category.
  • Noises PC/NPC — volume of noises associated with characters and NPC.
  • Voices PC/NPC — volume of character and NPC voices.
Images of Audio settings▾ click to open/close

image.png


Optimization — character optimization

A new system has been added Character Optimization, which helps increase FPS and make the game more stable in large-scale battles, sieges and other situations with a large number of characters on screen.

It works on a simple principle: the farther a character is from you and the farther the camera is zoomed out, the fewer resources the client spends on displaying that character. Nearby characters retain higher quality, while distant ones may be displayed a little more simply — but this allows a noticeable reduction in the load on the client precisely where it is most critical.

Depending on the selected optimization level, the system may update animations and visual effects less frequently, simplify the display of equipment, weapons, materials, textures and other elements. The more aggressive the selected mode, the more strongly performance is prioritized.

A separate part of the system is ATOS (Animation Tick Optimization System) — character animation optimization. It reduces the animation update rate for characters far from you, so the client spends fewer resources rendering them in large-scale scenes. With stronger optimization, the movements of distant characters may look less smooth.

  • Off — optimization is disabled.
  • Performance — maximum priority for FPS; animations and some visual elements in the distance are updated less frequently.
  • Balanced — a balance between performance and display quality.
  • Quality — a lower degree of optimization and smoother display.
  • Best Quality — minimal reduction in visual quality among the enabled modes, but also a smaller performance increase.

The main goal of the system is not to spend computer resources on maximum detail for what is far from the player and is hard to distinguish anyway. In normal gameplay, the difference is minimal, while in large-scale PvP and sieges this may provide additional FPS and more stable client operation.

Images of Optimization settings▾ click to open/close

image.png


Configure — controls and utility functions

The tab Configure contains mouse control parameters and a reference for keyboard shortcuts for the camera and interface.

  • Invert Vertical Mouse — inverts the vertical direction of mouse camera control.
  • Toggle MMB — enables resetting the camera distance by pressing the middle mouse button.
  • Move on LR Mouse — character movement by holding LMB+RMB.

Keyboard shortcuts

  • Insert — Make Character translucent — makes the character translucent.
  • Alt + H — Hide GUI — hides the interface.
  • Alt + L — Initialize GUI — resets the layout of interface windows.
  • Alt — Light up drop — highlights the names of items on the ground.
  • Ctrl + Shift + middle mouse button + mouse movement — Camera side slide — sideways camera shift.
  • Ctrl + Alt + Home — GUI scale default — restores the original interface scale. Helps restore access to the settings window if the selected scale made it inaccessible.
Images of Configure settings▾ click to open/close

image.png


Game Play — game settings and labels

The tab Game Play allows you to select party loot distribution, configure the visibility and display distance of labels, as well as font and icon sizes.

Party Loot Options — party loot distribution

The parameter Requirements determines the type of party loot distribution:

  • Finder Keeper — the item goes to the party member who picked it up.
  • Random — loot is distributed randomly among party members.
  • Random including spoil — random loot distribution, including items obtained using Spoil.
  • By turn — loot is distributed among party members in turn.
  • By turn including spoil — loot distribution in turn, including items obtained using Spoil.

Display creds — label display

  • Player — display of labels above your own character.
  • Party — display of labels above party members.
  • Clan — display of labels above clan members.
  • Ally — display of labels above alliance members.
  • Other PC — display of labels above other players.
  • Traders Names — display of trader names.
  • Traders Bulbs — display of bubbles with shop text above characters.
  • Display Titles — display of titles.
  • Display Names — display of names.
  • All On — enables all label display parameters in this section.

The sliders in the second section Display creds set the label display distance. These parameters control labels above objects, not the visibility of the models themselves.

  • NPC — display distance of labels above NPC.
  • PC — display distance of labels above players.
  • Traders — display distance of trader labels.

Fonts Scale — font size

  • Name/Title — size of names and titles above characters.
  • Traders Tooltips — text size of trade advertisements.
  • Chat — chat text size.

Icons Scale — icon size

  • Clan Icon — clan icon size.
  • Token Icon — marker icon size.
  • War Icon — war icon size.
Images of Game Play settings▾ click to open/close

image.png image.png


Screen Info — skill casting indicator

The section Skill Casting Bar on the tab Screen Info allows you to configure the skill casting indicator.

  • Skill Casting Bar Style — the indicator's appearance.
  • Show Skill Casting Bar — selection of the indicator display mode. The mode While Casting shows it while casting a skill.
  • Skill Casting Bar Scale — indicator size: from 50% to 150%.
  • Skill Casting Bar Rotation — the indicator's rotation angle.
  • Lock Skill Casting Bar — locks the indicator's position, protecting it from accidental movement.
  • Shake Skill Casting Bar on Interrupt — enables indicator shaking when skill casting is interrupted.
Images of Screen Info settings▾ click to open/close

image.png


Damage Text — pop-up notifications

The tab Damage Text controls pop-up labels about damage, resource recovery, combat events and loot. Each category can be enabled or disabled separately.

  • Style — pop-up label style.
  • Damage Text Scale — label size: from 50% to 150%.
  • All On — enables all notifications in the corresponding section. The button in the tab header enables all categories.

Player — your own character's events

  • Recover HP — HP recovery.
  • Recover MP — MP recovery.
  • Acquire XP — gaining experience.
  • Acquire SP — gaining SP.
  • Normal Damage — normal damage received.
  • Resistance — resistance to an effect.
  • Block — blocking an attack.
  • Evasion — evading an attack.
  • DOT Damage — periodic damage received.

Attack Target — events of the attacked target

  • Normal Damage — normal damage to the target.
  • Crit. Damage — critical damage to the target.
  • Over-hit — notification of Over-hit.
  • Block — blocking of an attack by the target.
  • Evasion — evasion of an attack by the target.
  • Resistance — the target's resistance to an effect.

Recover Target — restoration of the target's resources

  • Recover HP — restoration of the target's HP.
  • Recover MP — restoration of the target's MP.

Servitor — servitor events

The settings in this section apply to notifications above both the servitor and its target.

  • Recover HP/MP — restoration of HP and MP.
  • Normal/Crit. Damage — normal and critical damage.
  • Evasion — evasion of an attack.

Drop/Spoil — loot

  • Drop (adena) — notifications about adena.
  • Drop (base items) — notifications about recipes, resources, crafting parts and other small items.
  • Drop (whole items) — notifications about whole items: weapons, armor and jewelry.
  • Spoil + Quest Item — notifications about Spoil items and quest items.
Images of Damage Text settings▾ click to open/close

image.png image.png


Shortcut — hotkeys

The tab Shortcut allows you to configure hotkeys and create three local presets of bindings.

  • Assign Item Shortcut — a list of actions and panel slots for which hotkeys can be configured.
  • General — the assigned key or key combination for the corresponding action.
  • Reset — resets the binding for the selected action.
  • Reset Shortcut Settings — resets hotkey settings.
  • Load Presets — loads a saved local preset.
  • Save Presets — saves hotkey settings to a local preset.
  • Current preset — shows the current preset.
Images of Shortcut settings▾ click to open/close

image.png


General buttons of the settings window

  • Reset Window Location — resets the positions of interface windows.
  • Reset All Settings — restores settings to their default values.
  • Apply And Close — applies changes and closes the settings window.
  • Apply — applies changes without closing the window.
  • Cancel — closes the window without applying unsaved changes.

image.png

image.png

image.png

image.png

Ссылка на сообщение
Поделиться на других сайтах

Гость
Эта тема закрыта для публикации сообщений.
  • Сейчас на странице   0 пользователей

    • Нет пользователей, просматривающих эту страницу.
×
×
  • Создать...